A 'Cake-Like' Structure Under the Dust
The Moon's surface may look like a blanket of uniform grey dust, but data from the Chandra's Surface Thermophysical Experiment (ChaSTE) instrument reveals a more complex reality. In a study published around November 17, 2026, scientists analyzing data from the original
landing site found that the top 10 centimeters of lunar soil, or regolith, are made of three distinct layers, each with different properties. The topmost layer, down to about 3 cm, is extremely porous and fluffy, with a very low density. Below that, from 3 to 6 cm, is a layer with higher thermal conductivity. The third layer, between 6 and 10 cm, is denser still. This layered structure was not expected and provides the first direct, in-situ evidence of such fine-scale variations at the lunar south pole.
An Exceptional Thermal Insulator
One of the most striking findings from ChaSTE's probe was the dramatic temperature difference between the surface and the subsurface. Initial data showed a temperature drop of 50 to 80 degrees Celsius between the sunlit surface and a depth of just 10 centimeters. At local noon, the temperature gradient was measured at around 73 Kelvin (a 73°C difference) across that short distance. This confirms that the Moon's topsoil is an incredibly effective thermal insulator, far more so than initial models predicted. In the near-vacuum of the Moon, heat doesn't transfer easily. The loose, porous nature of the top layer of regolith acts like a blanket, preventing the Sun's intense heat from penetrating deep into the ground and stopping subsurface heat from escaping.
How ChaSTE Took the Moon's Temperature
The ChaSTE instrument, developed by teams at ISRO's Space Physics Laboratory (SPL) and Physical Research Laboratory (PRL), was designed for this specific task. It consists of a probe that can penetrate up to 10 cm into the lunar regolith. This probe is equipped with 10 highly sensitive temperature sensors along its length to create a detailed thermal profile of the subsurface. It also features a heater, which allows scientists to actively warm the soil and measure its thermal conductivity—how easily heat passes through it. This in-situ measurement was a first for the lunar polar regions and crucial for moving beyond theoretical models based on orbital data.
Clues From an Unexpected 'Hop'
The discovery of the soil's layered nature was bolstered by an earlier analysis following the Vikram lander's historic 'hop' experiment. Near the end of its mission, the lander fired its engines to lift off and land about 50 cm away. This manoeuvre blew away the top 2-3 cm of the fluffy surface dust, exposing the more compacted layer underneath. When ChaSTE was re-deployed at this new site, it found a two-layer structure. The new analysis from the original, undisturbed landing site completes the picture by detailing the full three-layer profile, including the super-porous topsoil that the hop had blown away. Scientists theorize these layers may have been deposited over time by impacts from nearby craters.
Why These Layers Matter for Future Missions
This detailed understanding of the lunar soil's thermal properties is not just academic; it is critical for the future of lunar exploration. The regolith's excellent insulating properties are a double-edged sword. On one hand, it means that subsurface habitats would be naturally protected from the extreme temperature swings of the lunar day and night. On the other hand, it makes dissipating heat from machinery, power plants, or habitats extremely difficult, posing a risk of overheating. Furthermore, knowing that the soil's density and cohesiveness change significantly with just a few centimeters of depth is vital for designing foundations, landing pads, and the mobility systems of future rovers. These findings are crucial for selecting sites and building sustainable bases on the Moon.















