Ohio tornado total in Aug. 11 derecho rises again. Where they touched down

The number of tornadoes out of severe thunderstorms and a possible derecho that struck Central and Southwest Ohio on Aug. 11 is growing again. On Thursday, Aug. 27, the National Weather Service confirmed another four tornadoes touched down during those storms, along with another instance of straight

Weather Watch

SEE ALL

Palm Beach Post

Hurricane center tracking 2 systems, including remnants of Tropical Storm Dolly

1Weather

Charlotte Weekend Weather: Clear Skies for Outdoor Events

1Weather

Pacific Ocean Becomes 'Hot Spot' for Storms Amid El Niño Conditions

What is the story about?

The number of tornadoes out of severe thunderstorms and a possible derecho that struck Central and Southwest Ohio on Aug. 11 is growing again.

On Thursday, Aug. 27, the National Weather Service confirmed another four tornadoes touched down during those storms, along with another instance of straight-line wind damage. That brings the total number of tornadoes on that day to 14 so far. And paired with another round of severe weather on Aug. 15 that brought another two tornadoes to the Buckeye State, at least 16 twisters hit Ohio that week.

A possible derecho that struck the state dumped four inches of rain on the region, brought hurricane-force winds and caused severe flooding. It cut power to tens of thousands of people.

So where did latest tornadoes

touch down around Ohio? Here are the details from the NWS.

At least 16 tornadoes hit Ohio during severe weather on Aug. 11 and 15. Here's where they touched down

Here are the most recent tornado confirmations from the Aug. 11 storms:

Butler and Hamilton counties: An EF1 tornado with peak wind speeds of 90 mph touched down at 3:13 p.m. near Millville in Butler County and lifted 12 minutes later near Ross in Hamilton County. It left an 11.33 mile path 500 yards wide at its maximum.
Franklin County: An EF1 tornado with 90 mph maximum wind speeds touched down at 10:08 a.m. in the Olde Town East neighborhood of Columbus and lifted at 10:10 a.m. near Bexley. It cut a 1.3-mile path 150 yards wide.
Franklin County: An EF0 tornado reaching maximum wind speeds of 80 mph hit east of Upper Arlington at 10:05 a.m. and lifted 3 minutes later near Grandview Heights. It was on the ground for 2.7 miles, leaving a path 150 yards wide at its maximum.
Madison County: An EF0 tornado with peak winds of 80 mph hit near Plain City, touching down at 9:51 a.m. and lifting 2 minutes later. It cut a path 1.21 miles long and 100 yards wide.

In addition, the NWS also confirmed straight-line wind damage in Franklin County. Winds of 60 to 80 mph, hitting 90 to 100 mph in some areas, hit Hilliard, Dublin, Worthington, Upper Arlington, Gahanna, Whitehall, Reynoldsburg and Blacklick Estates.

The NWS had previously confirmed 10 tornadoes out of that Aug. 11 storm:

Brown and Adams counties: An EF1 tornado with peak winds of 100 mph ripped through these counties for about eight minutes, from 4:16 p.m. to 4:24 p.m., leaving behind a 7-mile path of destruction 350 yards wide.
Brown and Highland counties: An EF0 tornado with maximum winds of 80 mph touched down near Fayetteville in Brown County at 3:59 p.m. and lifted 5 minutes later near Mount Orab in Highland County. It cut a path 3.6 miles long and 300 yards wide.
Champaign County: An EF1 tornado with winds reaching 110 mph touched down southeast of Urbana at 9:30 a.m. and lifted 4 minutes later. It cut a path 3.6 miles long and 200 yards wide.
Clark County: An EF2 tornado with wind speeds of 115 mph touched down at 9:33 a.m. near Catawba and lifted at 9:38 a.m., leaving a 3.5-mile path 400 yards wide at its maximum.
Clark County: An EF1 tornado with wind speeds of 100 mph touched down east of Springfield at 9:31 a.m. and lifted 9 minutes later. It left behind a path 9.1 miles long and 200 yards wide at its maximum.
Clark County: An EF0 tornado with winds of 80 mph touched down at 9:24 a.m. north of Springfield and lifted at 9:30 a.m., cutting a 4.5-mile path 150 yards wide.
Clermont County: An EF0 tornado with peak winds of 85 mph struck near Owensville at 3:47 p.m. and lifted 6 minutes later. It cut a path 5.2 miles long and 200 yards wide.
Clermont County: An EF0 tornado with winds speeds reaching 80 mph touched down near Montery at 3:49 p.m. and lifted at 3:55 p.m. That tornado was on the ground for 5.5 miles with a maximum with of 150 yards.
Franklin County: An EF1 tornado with winds reaching 100 mph touched down at 10:05 a.m. in south Columbus and lifted 4 minutes later. It cut a path 1.8 miles long and 100 yards wide.
Madison County: An EF1 tornado with wind speeds of 90 mph touched down at 9:44 a.m. northwest of Choctaw Lake and lifted a minute later, leaving a 0.8-mile path 125 yards wide at its maximum.

Previous straight-line wind damage from the storms was confirmed in:

Clermont and Brown counties: Winds with peak speeds of 80 mph began near Williamsburg in Clermont County at 3:56 p.m. and ended near Mount Orab in Brown County 10 minutes later, leaving a path 9 miles long and 4 miles wide.
Highland and Brown counties: Winds gusting at 90 mph at their maximum started near Sardinia in Highland County at 4:06 p.m. and ended at 4:14 p.m. near Mowrystown in Brown County. They cut a path 8 miles long and 3.5 miles wide.

Two other tornadoes from severe storms Aug. 15 were confirmed via video evidence, per the NWS. They touched down north of Dayton and Springfield, the NWS announced Monday, Aug. 17. One was confirmed north of Fletcher in Miami County, north of Dayton. The other touched down north of St. Paris in Champaign County, north of Springfield. Additional details, including their ratings on the Enhance Fujita scale, path and wind speeds, are pending as of Aug. 20.

How does NWS confirm tornadoes?

After suspected tornadoes are spotted, crews from National Weather Service survey possible tornado damage in person.

The pattern of damage, not how much damage was caused, determines whether it was a tornado, according to the weather service. For tornadoes, with their violently rotating columns of air, damage often has a chaotic appearance, with larger uprooted trees often crossing each other. Weather service surveyors often look at larger uproots of trees to get a true idea of where the wind was blowing from.

What's the difference between a tornado, a macroburst and a microburst?

The National Weather Service defines a microburst as a localized column of sinking air within a thunderstorm. Wind speeds in microbursts can reach up to 100 mph or higher, which is equivalent to an EF1 tornado. Winds this high can cause major damage to homes and other structures and level hundreds of trees.

The difference between a microburst and a macroburst is the size, according to the National Oceanic and Atmospheric Administration. A macroburst is larger than 2.5 miles, while a microburst is smaller than that. A microburst is also short-lived, usually lasting 5 or 10 minutes.

Again, the weather service looks at the pattern of damage to determine a microburst or macroburst. Damage from both looks flattened out, with trees pointing in the same direction or fanning out from one another.