A New Adulteration Method Revealed
An investigation by the Indian newspaper Dainik Bhaskar has brought a new form of gold adulteration to light. The report detailed an experiment where jewellery was made from a mixture of gold and rhenium, a rare and dense metal. Specifically, investigators
mixed one gram of rhenium powder with 7.83 grams of 24-carat gold. The resulting ornament, which had an actual gold purity of about 81.7% (around 20 karats), was then taken to various testing centres. Shockingly, it repeatedly passed as 22-karat gold, which should be 91.6% pure. It even received an official 92K916 hallmark certifying it as such. This has raised significant concerns about the integrity of gold testing, suggesting that consumers could be paying for 22-karat purity while receiving a substantially less valuable product.
Why Rhenium is a Deceiver
Rhenium is an ideal, if unlikely, candidate for gold adulteration due to its physical properties. It is one of the densest metals, with a density of about 21 g/cm³, even higher than pure gold's 19.3 g/cm³. This allows it to increase the weight of gold jewellery without altering its volume in a way that would be easily noticed. For years, the gold industry has been wary of tungsten, another dense metal used in counterfeits where a tungsten core is plated with gold. However, rhenium powder can be melted and mixed directly with gold, creating a homogenous alloy that is visually indistinguishable from the real thing. This method is more sophisticated than simple plating. Rhenium is also rarer than gold and crucial for industrial applications like jet engines, but it costs significantly less per gram, creating a strong financial incentive for fraud.
The Blind Spot in Purity Testing
The most common method for quick, non-destructive gold testing is X-Ray Fluorescence, or XRF. An XRF analyser shoots X-rays at a metal's surface, causing the atoms to emit their own characteristic X-rays. A detector then reads these signatures to determine the elemental composition. This process is fast and accurate for surface-level readings. However, its primary limitation is just that: it only analyses the surface, typically just a few micrometres deep. The investigation found that XRF machines failed to detect the rhenium, instead reading the mixture as 93.7% gold. This suggests that the way rhenium interacts within the gold alloy may effectively mask its presence from these common scanners. While XRF technology can theoretically identify rhenium, routine checks may not be calibrated or programmed to look for it, especially since it's not a traditional adulterant.
What This Means for Gold Buyers
This revelation undermines the trust placed in standard hallmarking and showroom testing. For consumers, it introduces a new layer of risk. You may purchase a hallmarked piece of jewellery believing it meets a certain purity standard, when in reality it could be adulterated with a cheaper metal. The financial loss can be significant; the Dainik Bhaskar report estimated a potential loss of nearly ₹15,000 per 11.66 grams of gold for an unsuspecting buyer. This incident serves as a critical reminder that a hallmark is only as reliable as the testing and oversight systems that back it up. For investors in gold bars, the issue highlights the importance of multi-layered verification. While this specific scam involved jewellery, the principle of sophisticated adulterants bypassing surface-level tests is a known risk in the bullion market as well.
Beyond the Surface: The Need for Better Standards
Preventing this type of fraud requires more rigorous testing methods. While XRF is useful for initial screening, it is not foolproof. More comprehensive, layered verification provides greater security. This includes ultrasonic testing, which sends sound waves through a bar to detect internal inconsistencies like foreign cores, and electrical conductivity tests. The most definitive method is a fire assay, where a small sample is melted down to separate the pure gold from other elements. However, this is a destructive process and impractical for finished jewellery. For the industry, this incident highlights a pressing need to update testing protocols and equipment calibration to specifically detect non-traditional adulterants like rhenium. It also points to the need for stricter regulatory oversight of hallmarking centres to ensure they are consistently and effectively identifying such sophisticated fakes.















